Bandit and SV Riders Club

handle bar risers

Post new topic   Reply to topic

View previous topic View next topic Go down

handle bar risers

Post  clare_richard on Fri Sep 04, 2009 11:33 am

Hi, i have an SV650S 2001 model. I was looking to put risers on the clip-ons. Gilles quoted £284 is that expensive? Also would i need to alter the cables in anyway or can they be left alone.

clare_richard
On foot

Number of posts: 2
Location: suffolk
Registration date: 2009-07-29

Back to top Go down

Re: handle bar risers

Post  OneeyedBandit on Fri Sep 04, 2009 12:11 pm

The Gilles stuff is now becomming very popular, especially rearsets.

http://www.calsport.co.uk/SUZUKI/3453-2003-SV_650__S_K3/31-Rearsets__Handlebars/Gilles_Rearsets__Handlebars/63818

I assume these are the ones and I assume that you can adjust the position of the bars?
I don't know if you need longer cables or not, but if they have risers, I assume you do.

However, Banditmania do a kit for straight bars which is very good and can provide you with HEL lines that are longer.

http://www.banditmaniashop.co.uk/sv1000s-top-yoke-conversion-full-kit-857-p.asp

Sarah has access to alot of stock, and alot of it is not listed on the website. So you can give her a call to see what deal she can do.

Best to call Tuesday - Friday from 10:30am - 4 and Saturdays 10:30 - 12. As they now close Saturday afternoons.

_________________
OneeyedBandit
Bandit & SV Riders Club Forum Administrator / Photographer


SV1000S K3 RIP 18/08/2008

OneeyedBandit
Admin
Admin

Number of posts: 746
Age: 33
Location: Nottingham
Motorcycles owned: 99-GSF600S, SV1000S K3, SV1000S K3
Registration date: 2007-08-06

Back to top Go down

risers

Post  clare_richard on Fri Sep 04, 2009 2:39 pm

Many thanks

clare_richard
On foot

Number of posts: 2
Location: suffolk
Registration date: 2009-07-29

Back to top Go down

View previous topic View next topic Back to top


Permissions of this forum:
You cannot reply to topics in this forum