rejetting a k2 bandit 600 carb kelvincvr32ss to suit a 750 coversion

just purchased 750 conversion for my 2002 600 k2 bandit, for the present i would like to use 600 carbs, kelvin cvr32ss. what jets do i need to rejet to suit 750. i know japan made one with same diameter carbs cvk32, should i use same jets. at a loss anyone done this or can help, thanks mick

112.5 mains should be somewhere near It's what i used years back on my old 750

thank tim, so i sould be ok with rest of carb jets, just need to up the main jet and let the juices flow. thanks again mick.

You would be better off with a Dyno jet kit so you will still have to Buy 112.5 mains still but the dynojet kit will give you needle adjustment so you can get the fuelling spot on

thanks again tim, just got to get on with fitting it .mick